Skip to main content

FAQ

Dimensions
Drive System
Frame
Maintenance/Modification
Riding Suggestions
After-Sales Service Policies

Dimensions

How do I determine the right bike size for me?

The Amflow UE series features an adjustable design, supporting a rider height range of 5'1"-6'3". You can swap between long and short stems, add stem spacers, or adjust the dropper post to tailor the bike to your height.

We also suggest visiting an Amflow authorized store for an in-person fitting to determine the best size for you.

How do I adjust the bike's fit?

Handlebar height can be adjusted by swapping the stem and stem spacers included in the accessory kit, while saddle height is adjusted via the dropper post. The dropper post can be pulled up 110mm at most.

What's the weight of Amflow UE?

The following weights were measured on bikes in factory configuration, with fenders, lights, front and rear racks, kickstand, bottle cage, and chain guard installed:

Fully equipped: Amflow UE Carbon 56lb, Amflow UE Carbon Pro 56lb.
Lightest weight: Amflow UE Carbon 46lb, Amflow UE Carbon Pro 46lb (with the front and rear racks, fenders, kickstand, chain guard, bottle cage, and test-ride pedals removed).

Weights may vary. Please refer to the actual product.

Drive System

What are the maximum power and torque of the Drive Unit?

The Drive Unit has a rated power of 250W, a maximum power of 750W, and a maximum torque of 125N·m.

Does Amflow UE have a hub-drive or a mid-drive motor?

Amflow UE uses Avinox M2 Drive Unit, which is a mid-drive motor.

What is the maximum customizable power output of the Amflow UE series?

When paired with the Avinox RS600 Battery, Amflow UE delivers a maximum peak power output of 750W.

For use with other Avinox batteries, please refer to the official Avinox website. Always comply with local laws and regulations when using the product.

What type of crank interface does Amflow UE's Drive Unit use?

It uses an ISIS interface. It is recommended to use the official crank for optimal compatibility.

How many miles can a rider travel on a full battery charge?

82mi.

The 82mi range was measured on a flat paved road with a 176lb rider on Amflow UE Carbon. Testing was conducted in the Eco assistance mode at a cadence of 65rpm and a speed of 13mph, with default assist settings and using Avinox RS600 Battery. Actual range depends on factors like temperature and wind speed. Results may vary.

How long does it take to charge the battery?

Charging the Avinox RS600 Battery with the included Avinox 168W Charger:
0-80%: 3h 34min
0-100%: 4h 36min

Charging the Avinox RS600 Battery with the optional Avinox 508W Charger:
0-80%: 1h 38min
0-100%: 2h 23min

All data was measured in a well-ventilated indoor environment at an ambient temperature of 77° F.

Can I still ride Amflow UE when the Drive Unit is turned off or if the battery runs out?

Yes. If the Drive Unit is off or the battery has run out, you can ride it like a non-electric bicycle by pedaling.

Can I charge the Amflow UE battery with third-party chargers?

To ensure battery safety, please use the original charger. If the charger is lost, please contact a dealer for assistance.

Does Amflow UE support battery replacements for the Drive System?

Yes. The Amflow UE series has a removable battery in the downtube. You can easily replace it without detaching the Drive Unit.

How do I store Amflow UE when I'm not using it?

It is recommended to store the bike indoors and maintain a certain level of charge in the lithium battery to prevent irreversible damage to the Drive System from extreme weather and temperatures.

Does the battery need to be charged to 100% to ensure its health?

The battery is equipped with a battery health management system, which ensures battery health even when not fully charged.

What do the different light colors on the charger indicate about the battery's status?

Yellow light indicates standby, red light means charging, and green light signifies a full charge.

What is the ambient temperature for battery charging?

32° to 104° F.

Does Amflow UE support the Avinox Charging Hub?

Yes. The Avinox Charging Hub can charge Avinox RS600 Batteries. It supports connecting up to 4 batteries at a time, charging them sequentially and prioritizing the battery with the highest remaining charge.

Does Amflow UE support an auxiliary external battery?

Not currently supported.

Can Amflow UE use the Avinox RS480 or RS800 Battery?

No. Amflow UE is only compatible with the Avinox RS600 Battery.

Can the charger be left connected to the bike after charging is complete?

The charger stops output once charging is complete, but we still recommend unplugging it once the battery is fully charged.

Can I use third-party range extenders with my Avinox Drive System?

The current Avinox hardware and firmware are not compatible with third-party range extenders. Using an unauthorized range extender may cause product malfunction and will void your warranty. In severe cases, it could cause component damage or pose a fire hazard.

Can the Avinox DP200 Control Display connect to the Avinox Wireless Controller?

Not currently supported.

Can the button functions on the Avinox DP200 Control Display be reconfigured?

Yes. Button functions can be reconfigured on the Customize Controls page of the Avinox DP200 Control Display.

Is it normal for Amflow UE's Control Display to feel warm or hot to the touch when in use?

Yes, it is normal. The Control Display and GNSS module generate heat, and the Control Display absorbs sunlight, so it is normal for the Control Display temperature to rise and, accordingly, for it to feel warm to the touch when in use.
Amflow UE's Control Display is equipped with a temperature sensor beneath the screen; if an abnormal screen temperature is detected, an error code will be displayed on the screen and an alarm will sound.

How bright is the Front Light?

The Front Light provides up to 500lm on low beam and up to 1200lm on high beam.

How do I turn on the high beam of the Front Light?

You can turn on the high beam from the Control Center page on the Control Display, or assign the high beam function to a remote button on the Customize Controls page.

How do I enable the automatic lighting feature?

Swipe up on the Control Display to open the Accessories page, then go to the Bike Light section to configure this setting.

How do I turn off the brake light?

Swipe up on the Control Display to open the Accessories page, then go to the Bike Light section to configure this setting.

What sizes of phones does the Avinox Phone Charging Mount support?

The Phone Charging Mount supports most phones on the market, with a width range of 2in to 3in.

How do I switch the Avinox Phone Charging Mount between portrait and landscape orientation?

There is a locking lever at the base of the Phone Charging Mount. Release the lever to rotate the mount and switch between portrait and landscape orientation. Tighten the lever to lock it in place.

What is the charging power of the Avinox Phone Charging Mount?

Wireless charging provides up to 15W power, while wired charging via the USB-C port provides up to 20W.
Supports PD protocol specifications including 5V/3A, 9V/2.22A, and 12V/1.66A.
When both wireless and wired charging are used simultaneously, wired charging is prioritized.

Does the Avinox DP200 Control Display support navigation?

Not currently supported.

Does the Avinox DP200 Control Display's USB-C port support charging external devices?

Not currently supported. It only supports data transmission.

What features are available when Amflow UE is connected to an Apple Watch?

After the connection, you can unlock the bike by proximity, enable smart heart rate control, and sync riding data.

Which Apple Watch models are supported by the Avinox Ride app?

The minimum supported watchOS version is watchOS 11. Compatible with Apple Watch Series 7 or later, and Apple Watch Ultra/2/3/4 or later (compatibility subject to actual conditions). Apple Watch SE series is not supported. We recommend that you pair your Apple Watch with iPhone 13 or later models that run iOS 18 or later.

Can I connect multiple Osmo Action cameras at the same time?

No. This is not currently supported.

Which action cameras are supported?

The following models have been tested and confirmed to be compatible:
Osmo Action 5 Pro
Osmo Action 6
Osmo 360
Osmo 360 II

Compatibility with future models will be updated on the official website.

Which heart rate monitors are compatible with Amflow UE?

We currently recommend the following models:
iGPSPORT HR70
XOSS X2 Pro
Polar H9
Wahoo TICKR
HUAWEI WATCH FIT 4 Pro
Apple Watch Series 7 and later models
Apple Watch Ultra/2/3/4 and later models

How do I use the SmoothShift feature on Amflow UE Carbon?

When the bike is equipped with the TRP E.A.S.I. RD-T7010E-S electronic shifting system, the Drive Unit will drive the freewheel to complete the shift when a gear change is detected.
To use SmoothShift, please ensure:
1. The bike is equipped with the TRP E.A.S.I. RD-T7010E-S electronic shifting system.

2. The TRP E.A.S.I. RD-T7010E-S rear derailleur is connected via the Avinox communication cable.

3. SmoothShift is enabled on the Control Display. For your safety, disable this feature and set motor assistance to OFF during maintenance or non-riding situations.

How do I use the Automatic Shifting feature on Amflow UE?

Amflow UE Carbon is equipped with the TRP E.A.S.I. RD-T7010E-S electronic derailleur, while Amflow UE Carbon Pro features Amflow's electronic internal geared hub. When a change in riding conditions is detected, the Drive Unit can automatically shift gears to keep the rider at an optimal cadence and torque. Here's how to use it:

1. Turn on the Automatic Shifting feature via the Control Display or the Avinox Ride app.
2. Set your target cadence, shift sensitivity, pedaling force, and coasting shift switch according to your riding preferences.
3. During normal riding, the shifting system will shift automatically based on road conditions.

You can still shift manually while Automatic Shifting is active, for an active response to changing conditions.

Why does Amflow UE Carbon Pro make a clicking sound when pedaling backward?

Amflow UE Carbon Pro uses an electronic internal geared hub with an internal ratchet mechanism. When in 2nd or 3rd gear, a clicking sound when pedaling backward is normal.

Why is the shifting sound a little loud on Amflow UE Carbon Pro while riding?

Amflow UE Carbon Pro uses a high-torque electronic internal geared hub. When downshifting under heavy load, the internal mechanism disengaging can produce a louder shifting sound, which is normal. Reducing pedaling torque while shifting can help minimize this noise.

Can Amflow UE users share ride tracks?

Yes. Ride data can be downloaded, shared, and exported through the Avinox Ride app.

If I unpair and pair the bike again, will I still be able to see my previous ride data?

It depends on the account you sign in with:
1. Signing in with the same account: Yes. Ride data is stored in the cloud and tied to your account, so you can still view your ride history in the app after pairing again.

2. Signing in with a different account: No. To protect user privacy, local data is cleared when the bike is unpaired, and a new account cannot access the previous account's ride data.

What is the speed limit of Amflow UE?

The drive system of Amflow UE automatically adjusts its maximum speed to comply with the regulations of the country/region you are in. Speed limits for major countries/regions are as follows:
European Union: 25km/h
United Kingdom: 25km/h
United States: 20mph
China: 25km/h
Australia: 25km/h

When abnormal movement is enabled, which smartphones support pop-up notifications from the Avinox Ride app for alerts?

Currently, Avinox Ride app push notifications can only pop up on iPhone and Huawei phones (mainland China only), and phones with Google Mobile Services (GMS). Please stay tuned for further updates on other phone models.

Notifications from the Avinox Ride app are effective only when the bike is connected via Bluetooth or a 4G network.‌ If Bluetooth is disconnected or a SIM card is not inserted into the bike, the app will be unable to send notifications.

Can I update software for Amflow UE myself?

Yes. First install the Avinox Ride app and pair it with your bike. When a new version is available, the app will send an update prompt. Simply follow the instructions to update.

Can the speed limit on Amflow UE be removed?

No. The maximum speed should comply with the regulations of the country/region where it is being used. Amflow does not provide a method to remove the speed limit.

What is the operating temperature of Amflow UE?

The normal operating temperature is 14° to 104° F.

What is the maximum operating altitude of Amflow UE?

It is suggested to stay below 16,404ft.

Frame

What specific category of bicycles does Amflow UE belong to? Under what conditions is riding permitted?

Amflow UE meets the Class 2 bicycle classification under ASTM F2043-13. In addition to covering the use conditions of Classes 1-2, this class also applies to rougher roads and trails that require a certain level of riding skill.

What is the frame warranty policy?

We provide a 5-year warranty for the Amflow UE carbon fiber frame (excluding paint finish) for the original owner. If ownership is transferred, subsequent owners are covered by a 2-year warranty from the original factory shipment date.

What bottle cages are supported, and what is the maximum bottle size?

1. Bottle cages: Compatible with most standard bicycle bottle cages on the market.
2. Bottle size: Supports bottles up to 25 fl oz (approx. 750ml).

What is the maximum load capacity of the frame?

The maximum supported total weight is approximately 368lb, including the bike, front and rear rack loads (max 44lb front, 59.5lb rear), and a rider weight of up to 264.5lb.

Maintenance/Modification

What should I pay attention to when installing and removing the Amflow UE battery?

When installing the battery, press it firmly until you hear two clicks, and make sure the indicator line on the battery is no longer visible.

What are the installation requirements for the dropper post?

Any 31.6mm-diameter dropper post can be installed. Please refer to the specs page for installation depth.
Dropper post travel: 125mm.

Does the Amflow UE Carbon Pro drivetrain require regular maintenance?

Amflow UE Carbon Pro uses a belt drive with an internal geared hub, which is maintenance-free for everyday riding. We recommend having it inspected at an authorized dealer after every 3,106 miles of accumulated riding.

What maintenance does Amflow UE require?

Due to natural wear and tear of the components, Amflow UE requires maintenance. Here is how to extend the lifespan and optimize performance for different parts:

1. Shock absorbers: Set the air pressure and adjust the compression and rebound settings according to the riding conditions before each ride. Clean the shock absorbers after each ride. Reapply anti-wear lubricant to the shock absorber's moving parts every 621 miles of riding.

2. Bike chain: Always clean the chain, remove dirt, and re-lubricate. A well-maintained chain should be replaced after about 621 miles of riding to prevent excessive wear on the chainrings. Use a dedicated chain checker to determine whether or not the chain requires replacement.

3. Crankset, chainrings, and cassette: The wear on these components largely depends on riding style, maintenance, and the environment. It is recommended to service them at an authorized store every six months.

4. Brake fluid: Brake fluid should be replaced annually to ensure excellent brake performance.

5. Rotors: Keep the rotors clean and free of dirt. Do not touch them with your hands, as the natural oils on fingers and hands can negatively affect brake pad performance. Clean promptly after riding on muddy roads. Dirty brake pads will wear out more quickly and affect braking performance, potentially causing significant noise when braking.

6. Pedals: Lubricate the pedal threads thoroughly before installation to reduce noise.

7. Grips: Grips are coated with rubber. If the rubber becomes porous or greasy over time or after exposure to the sun, it is recommended to replace them with new grips.

8. Wheelset: Wheelset should not have any vertical or lateral wobble. If you notice the wheelset has been impacted, you can go to a professional bike shop to adjust the spoke tension to correct any offset caused by impact.

9. Tires: Tires should always have sufficient tread for adequate grip on roads or trails. If you find sidewall damage when inspecting the tires, replace them promptly.

10. Downtube skid plate: After riding, be sure to clean the opening/closing mechanism to prevent mud and sand from getting trapped and building up, which may cause abnormal stiffness or jamming when opening and closing. If you frequently ride in muddy or sandy conditions, it is recommended to use a mud protection film for the downtube skid plate and replace it regularly.

11. Battery compartment: Before installing the battery, check the position of the wiring harness inside the battery compartment. Route the harness as far as possible along the left and right sides, and avoid leaving it in the middle, as this may affect proper battery installation.

12. Rack: Before each ride, check whether the rack and its fixing bolts are loose, and make sure the rack shows no visible deformation or cracks. Avoid overloading or uneven loading, as this may affect riding stability. After riding in rain or muddy conditions, clean the rack and mounting interfaces promptly.

13. Mudguards: Before each ride, check whether the mudguards and their fasteners are loose, and make sure there is enough clearance between the mudguards and the tires to avoid rubbing or abnormal noise during riding. After riding in muddy conditions, remove mud and debris from the mudguards promptly.

14. Belt: Before each ride, check the inner side of the belt for foreign objects to prevent them from getting jammed in the pulleys during riding. It is recommended to inspect the belt wear every 621 miles of riding.

Can users replace the belt themselves?

Not recommended. Belt replacement requires professional expertise, so we recommend having it done at an authorized service center.
Please also note that the belt contains carbon fiber cords and must not be bent.

Does Amflow UE support user modifications to the Drive System (motor/battery/sensors)?

No. The Drive System must use official Avinox components. Any modifications to the Drive System will void the warranty and may violate legal requirements.
If parts are damaged, please contact customer service to purchase spare parts.

Does Amflow UE support replacement shifting systems from other brands?

No. Amflow UE uses an electronic shifting system. To ensure safety and performance, this system is configured to work seamlessly with the bike's drive unit and battery system. If a replacement is required, please contact after-sales support for compatible options.

What are the dimensions and bearing specifications for the headset?

Upper headset bearing: inner diameter 40mm, outer diameter 52mm, height 7mm
Bearing specification: 45°/45°
Lower headset bearing: inner diameter 40mm, outer diameter 52mm, height 7mm
Bearing specification: 45°/45°

If replacement is needed, please contact after-sales support for purchasing information.

How do I choose the specifications for the front and rear tires?

Both the front and rear tires are 26×2.0 inches, with the standard model being Maxxis Overdrive 26×2.0.
If a replacement is needed, please visit a local store to purchase tires of the same specifications.

Does Amflow UE support converting the wheelset to a tubeless setup?

No.

What is the compatibility of rear-rack panniers?

The original rear rack on Amflow UE uses the MIK HD interface and is compatible with accessories that meet the MIK HD standard, with a maximum rated load of 59.5lb.

Please use bags or accessories that meet the MIK HD standard. All accessories must be installed correctly in accordance with the manual and the accessory manufacturer's instructions.

Does Amflow UE support a trailer?

Yes. Amflow UE supports bike trailer installation when configured correctly. Please note:
1. A compatible thru-axle must be used for Amflow UE Carbon, and Amflow UE Carbon Pro requires a matching adapter nut.
2. For details, please refer to the installation guide for the dedicated component: Amflow Urban Rear Thru-Axle.
3. Before installing a trailer, please read the Safety Guidelines carefully.
4. In some countries/regions, trailer use may be subject to legal restrictions. Please check and comply with local regulations before use.

Riding Suggestions

What should riders check before each ride on an Amflow UE?

1. Ensure the battery is adequately charged.
2. Check the thickness of the brake pads and rotors.
3. Inspect the tire pressure and wear on both the front and rear tires.
4. Check the screw torque at the main pivots of the frame.
5. Check the preload and lockout settings of the suspension fork.
6. Examine the chain for wear.
7. If you are wearing non-cycling pants during the ride, please use leg straps to secure your pant legs. This will help prevent them from getting caught in the bike's moving parts, which could result in personal injury or damage to the bike.
8. Rack: Before each ride, check whether the rack and its fixing bolts are loose, and make sure the rack itself has no obvious deformation or cracks.
9. Mudguards: Before each ride, check whether the mudguards and their fasteners are loose, and make sure there is enough clearance between the mudguards and the tires to avoid rubbing or abnormal noise during riding.
10. In all riding scenarios, we recommend wearing a properly fitted cycling helmet.

Do I need a special helmet when riding Amflow UE?

We recommend wearing a properly fitted cycling helmet in all riding scenarios.
For urban riding, please consult your local traffic authority for specific regulations.

How should the bike be configured for load-carrying use? What should riders keep in mind?

Amflow UE supports everyday load-carrying use. If you need to carry cargo, we recommend the following:
1. Install the original front and rear mudguards, rear rack, and kickstand.
2. All accessories must be installed in accordance with this manual and the accessory manufacturer's instructions.
3. For first-time installation, it is recommended to have the work completed by an authorized Amflow UE retailer.
4. Before each ride, check whether the rack, kickstand, fixing bolts, and other connection points are secure. If you notice looseness, deformation, or abnormal noise, stop using the bike immediately and have it inspected.

When riding with cargo, please pay special attention to the following:
1. Carrying cargo significantly increases braking distance and turning radius. Adjust your riding style according to the actual load, and ride steadily at a controlled speed.
2. Avoid sudden acceleration, hard braking, or sharp turns, as these actions may cause the bike to tip over or lose control due to inertia or shifts in the center of gravity.
3. Do not exceed the bike's maximum permitted total weight or the maximum load limits marked on each accessory.
4. In some regions, carrying passengers or cargo on an e-bike may be subject to legal restrictions. Be sure to check and comply with local regulations in advance.

After-Sales Service Policies

What are the Return & Refund Policies for Amflow products? What are the important points to consider?

You are eligible for our Return & Refund Service if you made purchases through Amflow Official Online Store and meet the following conditions: Within thirty (30) calendar days starting from 00:00 on the day after receiving a product if the packaging, accessories, complimentary products, and user manuals are intact, the product is unused, the Drive System is not activated, there is no damage due to user-related factors, and the second sale is not affected.

To facilitate a smooth return process, kindly retain the original packaging during the return period. This will enable repackaging in the event of a return, thereby minimizing the risk of damage during transportation.

For more details, refer to After-Sales Policies.

What is the Warranty Policy for Amflow products?

We've got you covered. We provide warranty repair service for the main parts manufactured by Amflow. You can apply for warranty repair service if the under-warranty product has a manufacturing defect.
The warranty periods for the main parts of the Amflow product are as follows:
1) Carbon Fiber Frame (Excl. Paint and Graphics): 5 years for the original owner; if transferred, the warranty will be limited to 2 years from the date of shipment from Amflow to the original owner.
2) Stem, Handlebar, Wheels, Paint and Graphics: 2 years.
3) Accessories*: 1 year.
This limited warranty specifically excludes any parts (including but not limited to transmission, brakes, and suspension) not manufactured by Amflow. However, Amflow is authorized by the manufacturer of the Drive System (including drive unit, battery, display, wireless remote, charger and bike lights) to provide warranty service in accordance with the warranty policy on the Drive System manufacturer’s official website. The warranty period for the Drive System is 2 years, and the battery is covered for 2 years with up to 500 charge cycles. Other parts are covered directly by the corresponding third-party manufacturer in accordance with their warranty policy.
You can find information about the service coverage and details of the Amflow warranty on the after-sales policies page.

* Accessories include bike lights, bells, pumps, and torque key provided with the bike.

How are the Easily Worn Parts of Amflow guaranteed?

Outdoor bikes, due to their natural usage, may cause wear and tear to parts such as tires, rubber stopper, and transmission components when used for extended periods on uneven surfaces or exposed to outdoor conditions. The extent of wear and tear is influenced by factors such as your usage patterns, environmental conditions, and maintenance of the product. It is difficult to accurately estimate the extent of wear based on duration of use. Therefore, Amflow's warranty policy does not cover easily worn parts.
Easily Worn Parts include: Tires, Screws & Nuts, Gaskets & Washers, Bearing, Rubber Stopper, Grips, Cables, Transmission components (Chain, Chainring, Cassette), Fender & Cover Plate, and Saddle Fabrics.
For more details, refer to After-Sales Policies.

Is there a policy offering discounted repairs for my bike in the event of damage caused by an accident?

Our aim is to guarantee worry-free riding for you. Throughout the warranty period for the Amflow carbon frame and carbon wheel, if you damage your frame or carbon wheel by accident and it's not covered under warranty, we can offer a discounted replacement service once to the original owner. The specific discount shall be determined by Amflow at the time of service.

Who should I contact if there's an issue with my bike?

If there is an issue with your bike, we suggest reaching out to the nearest Amflow authorized dealer. They can assist you with repair services or help you submit a warranty repair service request. Alternatively, you can directly contact Amflow official customer service for technical support, purchasing repair parts, or applying for warranty repair services.